POE-250HD

H.264 1.3 MegaPixel POE Vandal Proof Dome

Key Features

  • 1.3 megapixel progressive scan CMOS
  • Multiple H.264, Motion JPEG and MPEG-4 video streams
  • 4 – 9mm vari-focal megapixel lens
  • Two-way audio with audio detection
  • Power over Ethernet (IEEE 802.3af)
  • IP66 rated weatherproof and vandalproof housing
  • Full support for Firefox, Safari and Mac OS
  • Use in banks, casinos, warehouses, seaports, outer building premises and cargo loading bays

The POE-250HD is a high-end 1.3 MegaPixel network camera designed for professional outdoor surveillance and security applications. MegaPixel (MP) IP cameras offer improvements in image quality compared to conventional surveillance cameras. The possibility to view live video streaming from AirLive IP Cameras over the Internet is only one of the benefits. AirLive POE-250HD is designed to offer high-performance surveillance and is equipped with PoE port, allowing power and data to be transmitted via a single Ethernet cable This provides an easier installation, lower cabling costs and allows placement of AirLive PoE cameras in locations without access to electrical source.

H.264 Compression

H.264 is a high performing video compression standard that boasts a much higher compression ratio than MJPEG or MPEG-4, drastically reducing file sizes and conserving valuable network bandwidth and storage space. With up to 90% reduction in file size, an 1 MB image can be drastically reduced to as low as 10KB using H.264.

Vandal Proof Housing with IP66 Waterproof Resistance

AirLive POE-250HD is an IP66 rated weather proof IP camera designed for 24hr indoor/outdoor surveillance under the harshest conditions. AirLive POE-250HD toughened glass and vandal proof housing provides protection against the intrusion of burglar, dust, accidental contact, and water.

1.3 Mega-Pixel Video Quality

AirLive POE-250HD offer high quality image at maximum 1280x1024 resolution. One of the most compelling advantages of MegaPixel surveillance systems is their ability to capture more details in a frame and at the same time not missing any finer details that are useful for license plate identification and human recognition.
* Red box is standard 640X480 image resolution. The AirLive POE-250HD offer 4 times bigger image size compare to VGA camera.

APPS for Android and iOS

AirLive has worked with IPCAM Viewer developer to add support for AirLive IPCAM. So you can view multiple AirLive cameras using Android device, iPhone, or iPad. For more information about Android or iOS apps, please visit the FAQ page.

Model
  • POE-250HD
Camera
  • Camera Type
    - Outdoor Dome Vandal Proof Type
  • Image Sensor
    - 1/4” 1.3 Mega Pixel Color CMOS Sensor
  • Sensor Resolution
    - 1280x1024
  • Lens Type
    - Varifocal Lens
    - 4~9mm
  • Minimum Illumination
    - 1 Lux
  • Viewing Angle
    - 22.6° ~ 48.5°(H)
    - 17.1° ~ 37.3°(V)
Video
  • Video Compression
    - H.264, MPEG4, MJPEG
  • Video Profile
    - 20
  • Resolution and Frame Rate
    - 1280x1024 @ 15 fps
    - 640 x 480 @ 15 fps
    - 320 X 240 @ 15 fps
    - 160x128 @ 15 fps
  • Streaming
    - Multi-profile streaming
    - Streaming over UDP, TCP, or HTTP
    - M-JPEG streaming over HTTP (for non IE browser)
    - 3GPP mobile view
    - Configurable frame rate and bandwidth
    - Support both CBR and VBR
    - ROI
  • Region of Interest
    - Up to 5 configurable region
  • Image Processing
    - AE, AWB
    - Noise reduction
    - Color, brightness, sharpness, contrast, Hue
    - Mirror/Flip
    - Privacy Masks
    - Text, time and date OSD
  • Digital Zoom
    - 10X
Audio
  • Audio Encoder
    - RTSP: G.711 64kbps, G.726 32kbps
    - 3GPP: AMR
  • Audio Streaming
    - Two-way
  • Audio Input/Output
    - speaker and microphone port
Network
  • Ethernet
    - One RJ45 Port; IEEE 802.3u Compliant 10/100 Mbps Fast Ethernet with Auto-MDIX
  • PoE or Wireless
    - IEEE802.3af
  • Supported Protocols
    - TCP/IP, UDP, ICMP, DHCP, NTP, DNS, DDNS, SMTP, FTP, HTTP, HTTPs, Samba, PPPoE, UPnP, Bonjour, RTP, RTSP and RTCP
  • Security
    - Password protection
    - IP filter
    - HTTPS
  • Users
    - Up to 20 simultaneous users
LED and Button
  • Power LED
    - Amber Color
  • Link/Act. LED
    - Green Color
  • Reset Button
    - Reboot and Factory Default (Push and Hold Over 8 Sec)
General
  • Network Processor
    - DSP Base
  • System ROM
    - 8 MByte NAND Flash
  • System RAM
    - 128Mbyte DDR SDRAM
  • Power Supply
    - DC12V
  • Power Consumption
    - 7 Watts Max.
  • Connector
    - RJ-45 10BaseT/100BaseTX
    - 12V DC power jack
    - Microphone/Speaker jack
    - Composite video out
    - Reset button
  • Environment
    - Operation Temperature: -10°C to 50°C (14°F to 122°F)
    - Operating Humidity:  20% ~ 80% (non-condensing)
  • Dimension
    - HxWxD:159x100x95 mm
System Integration
  • Software 
    - Search & Installation-IP Wizard II
  • Event Triggers
    - Motion detection
    - External input via DI interface
  • Motion Detection
    - 10
  • Event handler
    - FTP or NAS file upload
    - E-mail alter
    - HTTP, and TCP notification
    - DO (digital output) alarm
  • UPNP
    - Yes
  • Application Programming Interface
    - Open API for software integration
    - SDK
  • Video Buffer
    -  Pre- and post- alarm buffering
  • Alarm Triggers
    - Intelligent video motion detection and external input
  • Alarm Events
    - File upload via FTP or email
    - Notification via email, HTTP, and TCP
    - External output activation
    - Audio alerting output
Viewing System
  • OS
    - Windows® XP, Vista, 7
  • Browser
    - IE 6.0 or later, Firefox 2.0 or later, Safari
  • Cell Phone
    - With 3GPP player
  • Video Player
    - VLC, Quick Time, Real Player, Core Player

Download

Title Download
POE-250HD Spec Sheets Spec Sheets SC1209970316572
POE-250HD QIG QIG SC1300780893105
POE-250HD User Guide User Guide SC1210563646143
Building Stable Video Networks Other Documents SC1422927594154
IPCAM VMS NVR Compatibile List Other Documents SC1422927594154
Title Description Download
AirLive IP Wizard II version1.0.0.3 Easy installation with AirLive IP Wizard II Setup for discover AP & IPCam’s IP address and set up related parameter .
Firmware Version 5.0.2.6495, Fixed Bugs: Streaming server will crash when change record type continuously. Support prodducts: POE-100HD, POE-200HD, POE-250HD, OD-325HD, OD-325HD-2.5MM, OD-600HD Features 1. Add timeout parameter to image.cgi 2. Modify translation of Japanese Fixed Bugs 1. Can not record to sd card when recordinglist.xml file doesn't exist in sd card. 2. Streaming server will crash when change record type continuously. 3. Upgrade an error firmware made web server stop working. 4. Sometimes the checksum of backup file will error. 5. After image flip, the setup did not save
Firmware Version 5.0.2.5152. Fixed Bugs:can not change streaming resolution in iPhone. Support products:POE-100HD, POE-200HD, POE-250HD, OD-325HD, OD-600HD. Improved Features 1. Open Sony IRIS control interface for lens calibration. (Setting->Camera->Picture: Auto Iris) : AM9670M, 9770M only 2. Open Sony auto de-noise function: AM9670M, 9770M only 3. Event schedule: remind user to set email send to field. 4. Implement speed of tour. 5. Improve multi-language translation. 6. Support Google Chrome browser Fixed Bugs 1. ActiveX: Can not show Japanese language in Win7. 2. Can not change streaming resolution in iPhone. 3. Streaming server deny of service if client “keep connection with wrong authentication” 4. Add dyndns server to IP filter allow table. 5. Google chrome : Can not save setting. 6. Event Schedule : Improve send one jpeg procedure. 7. Redirect Opera browser to image.cgi in view and image page. 8. Host name can not allow not allow ][~!@#&;:,<>+=?(){}$"'|/\ 9. IP wizard : Can not change IP and password concurrently. 10. Remove motion parameters while delete motion. 11. DI status fail while EFT testing (EMI) 12. While ipcam connect to pc directly, sometimes IPcam only can connected with 169.254.x.x ip.
Firmware Version 5.0.2.4041 add Region of Interest (ROI) function which helps user to define notable areas in the camera's viewing and hence save the bandwidth. Support products: POE-100HD, POE-250HD, POE-200HD, OD-600HD.
POE-200HD, Firmware Version 5.0.1.3713 add new languages (Czech, Portuguese, Spanish, Polish ,Croatian )
Firmware Version 5.0.1.3576 revise Digital signal input control problem. Support products: POE-200HD, POE-250HD, OD-600HD.
Title Download
SDK (1.3MP) for POE-250HD, POE-200HD, POE-100HD, POE-100HD-ICR, OD-325HD, OD-325HD-2.5MM SDK

Frequency Ask Questions (FAQ)

  • Q1 How to Access AirLive IP Camera on IE11

    Why I can't see the live view image on IE11?

     

    Due to IE11currently doesn't support ActiveX component, so you need to add the IP Camera to the "Compatibility View Setting" then you can easily access to the camera and view the image on IE11.  Please refer to the attached file for your reference.

    How to Access AirLive IP Camera on IE11.pdf
  • Q2 Why can't I see the video image using Windows 8's Internet Explorer?

    Windows 8 comes with 2 different versions of Internet Explorer.  Please use the Internet Explorer on the Windows 8's Desktop.  The Internet Explorer on the Metro interface does not support Active-X.

  • Q3 Can we change the cable hole of PoE-250HD from side to bottom?

    In order not to damage the camera, we DO NOT suggest to switch the cable hole by users.

     

  • Q4 Can I take the picture with the same photo name every 1 minute?

    AirLive's IP CAM supports this function that can take the picture every one minute but the file can't be the same name. All the photos will be named by time.

  • Q7 What does IP Code mean?

    The IP Code, Ingress Protection Rating, sometimes also interpreted as International Protection Rating, classifies and rates the degree of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in mechanical casings and with electrical enclosures.

    Solid particle protection
    The first digit indicates the level of protection that the enclosure provides against access to hazardous parts (e.g., electrical conductors, moving parts) and the ingress of solid foreign objects.

    IP Level
    1st Digit
    Description of Protection Level
    0 Not protected
    1 Protected against solid foreign objects of 50 mm diameter and greater
    2 Protected against solid foreign objects of 12,5 mm diameter and greater
    3 Protected against solid foreign objects of 2,5 mm diameter and greater
    4 Protected against solid foreign objects of 1,0 mm diameter and greater
    5 Protected from the amount of dust that would interfere with normal operation
    6 Dust tight



    Liquid ingress protection
    Protection of the equipment inside the enclosure against harmful ingress of water.

    IP Level
    2nd Digit
    Description of Protection Level
    0 Not protected
    1 Protected against vertically falling water drops
    2 Protected against vertically falling water drops when enclosure is tilted up to 15°
    3 Protected against water sprayed at an angle up to 60° on either side of the vertical
    4 Protected against water splashed against the component from any direction
    5 Protected against water projected in jets from any direction
    6 Protected against water projected in powerful jets from any direction
    7 Protected against temporary immersion in water
    8 Protected against continuous immersion in water, or as specified by the user


    Reference: Wikipedia

    
  • Q8 What is the difference between Passive PoE and Active PoE?

    Active PoE has active components inside and it is able to transfer power up to 100 metres. Passive PoE uses free wires in the Ethernet cable and sends the equipments power along them to the far end. Passive PoEs range is about 30 to 40 metres / 100-130 ft.

  • Q9 What is VBR and CBR?

    VBR and CBR can usually be found under IPCAM's camera settings.  VBR stands for "Variable Bit Rate". When the camera is set to "VBR" mode, the bandwidth used by IPCAM is determined by the image quality setting. CBR stands for "Constant Bit Rate".  When the camera is set to CBR mode, the users can defined what is the maximum bandwidth that the camera can use. For example, user can define the bit rate to "4Mbps". It means the camera can not use more than 4Mbps bandwidth. The image quality may drop to preserve the maximum bandwidth used.

  • Q11 Is this possible that camera works at horizontal position or vertical position?

    Yes, AirLive IP Camera can work at horizontal or vertical position. User can select rotation function to make the mirror or vertical flip.

  • Q12 IP Surveillance Installation Video - Firmware Configuration and Lens Adjustment

  • Q13 IP Surveillance Installation Video - Hardware

  • Q14 Is there any App that can help me to view my IP camera on my smart phone (iOS or Android)?

    The IP Cam Viewer can support AirLive IP Camera and help you to view AirLive IP camera on a iOS or Android smart phone. Please search for "IP CAM Viewer" and download this App in AppStore or Market.  The "IP CAM Viewer Lite" is free for Android.

    Note:

    1.) If your camera is as under list, please choose the model “OD-600HD” of IP Cam Viewer.

    OD-600HD, OD-325HD,OD-325HD 2.5mm,

    POE-100HD, POE-100HD-ICR, POE-200HD,POE-250HD

     

    2.) If your camera is as under list, please choose the model “WN-2600HD” of IP Cam Viewer.

    WN-2600HD, POE-2600HD, OD-2060HD, OD-2025HD, OD-2025PHD, WN-200HD, IP-200PHD

     

    3.) If your camera is as under list, please choose the model “POE-5010HD” of IP Cam Viewer.

    POE-5010HD


    4.) If your camera is as under list, please choose the model “WL-2600CAM” of IP Cam Viewer.

    WL-2600CAM, POE-260CAM, WL-2000CAM, WN-150CAM, IP-150CAM, WL-350HD, POE-280HD, POE-100CAM v2, POE-200CAM v2

  • Q16 What kind of the microphones can work with below AirLive IP Cameras?

    Please choose the microphone which is with a standard 3.5mm jack to connect with AirLive IP Cameras.

  • Q17 Can i take recording video using browser?
  • Q18 How to setting motion detection function in IP cameras?
  • Q19 How can I create preset when I cannot control camera lens?

    You can move camera lens by hand, you must open the front case.

  • Q21 Could I somehow create a profile on the FTP settings which will upload a jpg or any type of image every a specific time of period?
  • Q22 How to use AirLive IPCAM with mobile phone?
  • Q23 How to use AirLive IPCAM with network album?
  • Q24 Please find the following detailed information of DI/DO cables usage of IP-Cam.

    DI
    DI is trigger by circuit open or short. It is use DI+ Green/White and GND Blue/White.
     
    DO
    DO is a voltage output. Turn on is DC 12V output, turn off is 0V. It is use DO+ Orange/White and GND Blue/White.
     
    DC 12V
    12V cable will always provide DC 12V(50mA maximum) output. It is use 12V+ Brown/White and GND Blue/White. (12V cable don't necessarily need to use.)

  • Q25 How can I configure DDNS IPCAM at CamProExpress

Model No .

AirLive POE-250HD H.264 1.3 MegaPixel POE Vandal Proof Dome

EAN Code

13 Code 4179869615374
14 Code 14719869615371

Included Accessories

Packaging content: POE-250HD, Screws*4, L-Wrench, Power Adapter, AutoRun CD, QSG

Optional Accessories

SP-100E Network Surge Protector

Standard Package

Packaging Type:
Packaging Size 265 x 200 x 140 mm
Packaging Weight: 1.635 kg

Carton Packaging

Quantity(units / per carton) 8
Dimensions 18 x 14.5 x 12 cm
Weight 14.44 kg
Top
Back to top