Airlive PoE switch can automatically detect the presence of an 802.3at/af compliant powered device (PD) and provide power through the port. Airlive switch provides up to 30W per PoE port and can be used to power AP, IP phone, IP Cam and other PD devices.

Airlive PoE switch equipped with high Power AC/DC power module , it does not require external Power adapter and can power up to 24 PoE devices for PoE-FSH2004L-370 with maximum 370W of total power for PD, and 8 Port PoE devices for PoE-FSH1008AT with maximum 130W of total power for PD.

To provide intelligent connection guard to benefit the enterprise customers with the reduce costs. At most cases, IP-cameras and access points are located in places that are not easy to reach after initial installation. Device Guard Switch monitors the IP cameras or access points by their IP or packet status and will automatically re-power a device when a non-responsive status is detected. Both wireless and surveillance networks run smoothly without extra technician manually support.

Airlive websmart switch supports two types of VLANs: Port Based VLAN and Tag Based VLAN (802.11Q), it allows users to separate surveillance network from other networks easier.

A network surveillance system is better to design to keep the surveillance network separate from other networks for performance reasons.

VLAN is a technology for virtually segmenting networks. It can be achieved by dividing network users into logical groups. Only users in a specific group are capable of exchanging data or accessing certain resources on the network. If a network video system is segmented into a VLAN, only the servers located on that VLAN can access the network cameras. VLANs normally provide a better and more cost-efficient solution than a separate network.

To ensure available bandwidth for surveillance device, users are able to set the level of priority for specific ports on a switch.
In order to ensure the bandwidth's availabilities for critical surveillance video, connections to network cameras and storage servers should be set at high priority while others can be set for low priority.(desktops, e-mail, FTP,HTTP,…etc.)

To ensure available bandwidth for surveillance device, users are able to set the level of priority for specific ports on a switch.
For efficient management, Airlive PoE web smart switch allows the MIS or surveillance administrator to manage the switch from a distance.
To reboot or disable/enable PoE power, IP camera or Access Point, they are able to do it remotely.

AirLive GSH2004L-370, FSH1008AT offers 4UTP/SFP combo and 2 combo ports boast a high performance switch architecture for long distance. Airlive web smart Switch with its build-in SFP slot allows itself to connect with Fiber up to 80km distance.